Technical data
Working measurements
Maximum board stack for Stack Cutter 1500:
Max. width: 1450 mm (57")
Max. height: 1450 mm (57")
Dimensions
Stack Cutter outer measurements.
Length: 2600 mm (102")
Width: 1100 mm (43")
Height: 1900 mm (75")
Electrical system and motor
The electrical motor is a, specially wound, motor with a rated output of 5kW (7 hp). While cutting, the motor load is 7-8 kW. It is protected by a temperature sensor.
Total continous output: 5 kW (7 hp)
Electricity supply: 3-Phase, 400 V, 16 A
Also available as 3-phase, 220 V, 30 A
Insulation class: IP54
This insulation class means that the motor and the entire electrical system are unaffected by running water, thus capable of standing outdoors in the rain.
Sound level and ergonomics
The Stack Cutter 1500 is designed to provide the user with the best possible working conditions. The controls are positioned at work height and a Plexiglas sheet protects the operator against any flying chips. The sound level requires hearing protection.
Acoustic pressure: 102,0 dB (A)
Acoustic power: 113,0 db (A)
Vibrations in the controls: Very slight
Cutting equipment
Logosol has a deep experience with different cutting machines and have chosen a standard 3/8” cross-cutting chain for the Stack Cutter.
Chain pitch: 3/8"
Chain speed: 22,5 m/s (78 ft/s)
Chip handling
The Stack Cutter works perfectly well without any chip transport equipment. However, since this will create considerable quantities of chips on the work site, a chip fan is recommended.
A simple accessory chip fan to the the Stack Cutter 1500 is available to be fitted on the Stack Cutter support legs. Connecting the Stack Cutter to existing chip evacuation systems works equally well.
Chip outlet (connection for flexi-hose): 100 mm (3 15/16”)
Min. chip fan capacity needed: 700 m3/h (24500 cubic ft per hour)
|
|
|